STP8X000

Hand-Portable Terminals | TETRA

Intrinsically Safe TETRA Hand Portable

Built to withstand the very harshest working conditions, the Intrinsically Safe STP8X000 delivers unrivalled audio clarity and enhances safety for workers in hazardous environments.

The full-keypad STP8X000 carries an IP67 environmental protection rating - continuing to work after submersion in up to 1m of water for up to 30 minutes - and meets the exacting requirements of the IECEx/ATEX standard.

The Intrinsically-Safe Sepura TETRA radio provides class-leading audio clarity and with a large, high resolution display, the STP8X000 provides crystal clear screen viewing in all light conditions.

Highlights

Functions

SECURE SECURE

Designed for mission critical use, the STP8X000 supports ETSI and SFPG recommended Air Interface Encryption and End to End Encryption

Wide range of accessories Wide range of accessories

Multiple accessory options all certified to ATEX V6 standard

ADVANCED SAFETY FEATURES ADVANCED SAFETY FEATURES

Protection and reassurance for lone or remote workers. Man-Down offers motion- and tilt-monitoring, local alarm and over-the-air alerts for vulnerable users working in dangerous environments

Apps Capability Apps Capability

Connection with external devices such as Bluetooth connected printers, barcode readers and RFID scanners through SDA and WAP. SDA enables a Sepura radio user to send and receive data in a user friendly form-based environment

V6 ATEX Standard V6 ATEX Standard

Meets the requirements of the IECEx/ATEX Standard V6

Long battery life Long battery life

Covers long shift periods

Bluetooth and GPS Bluetooth and GPS

Highly sensitive positioning through GPS

Hot-swap technology Hot-swap technology

Allows Sepura-approved and certified Nexus-based headsets to be attached or removed in hazardous areas

Storage expansion Storage expansion

MicroSD card slot enables further storage

IP67 Environmental Rating IP67 Environmental Rating

Submersible underwater up to 1m for 30 min

The full STP8X000 technical specifications are available for download at the bottom of this page.

STP8X000 Specification

Dimensions

61 X 139 X 44 mm

Weight

338 g

Battery

1400 mAh

RF Power

Class 4

Frequency Bands

380-430 MHz, 407-473 MHz

Static Receiver Sensitivity

-112 dBm

Dynamic Receiver Sensitivity

-103 dBm

Speaker Audio

1 W

Operating Temperature

-20°C to +55°C

Storage Temperature

-40°C to +85°C

IP Rating

IP67

Screen

30 X 38 mm, TFT, 176 X 220 pixels

Secondary Data Bearer

Bluetooth

Haptics

No

Side Soft keys

Yes

Water Porting

No

GNSS

GPS

IECEx

Gas Environment:
Ex ib IIC T4 Gb (-20°C ≤ Ta ≤ +55°C)
Dust Environment:
Ex ib IIIC T90°C Db (-20°C ≤ Ta ≤ +55°C)

ATEX

Gas Environment:
Ex II 2G Ex ib IIC T4 Gb (-20°C ≤ Ta ≤ +55°C)
Dust Environment:
Ex II 2D Ex ib IIIC T90°C Db (-20°C ≤ Ta ≤ +55°C)

Accessories compatible with STP8X000

Antennas

Power

Audio

Carrying

Programming

DMO-Repeater

In locations where normal TMO network coverage is unavailable or unreliable, users can switch their radios to Direct mode to maintain communication.

To increase the distance between two Direct mode users, place a Sepura radio operating as a DMO-Repeater in between. Calls made from one DMO radio via the DMO-Repeater will be rebroadcast to other DMO users.

Key Features

  • Voice calls (Encrypted and Clear)
  • Status and SDS message
  • Emergency calls
  • Call Participation and Call Monitoring

Type

  • Type-1A-DMO-Repeater for efficient spectrum use

Ordering Part Numbers

  • SC20 and SC21 Series: 600-00261
  • STP9000, STP8X Series: 600-00004
  • SRG3900 Series: 600-00005

Man-Down

Man-Down allows the radio to automatically detect when the user may have become incapacitated. A radio equipped with a solid state accelerometer allows the user to be monitored for lack of motion and/or abnormal inclination or ‘tilt’. Should a sensor trigger, a local alarm or emergency call can be setup on the radio.

A radio user who remains stationary for long periods, may customise Man-Down to raise an alarm only in case of abnormal inclination, which would require help.

Ordering Part Numbers

  • STP Series: 600-00031
  • SC20 Series: 600-00267

Callout

Callout provides a user friendly interface to distribute critical information quickly and efficiently to a larger number of users.

In the event of an incident, the feature draws the radio users attention forcing a response. Optional phases allow specific groups to be attached for subsequent exchange of information.

The Feature Includes

  • Simple Callout
  • Full Callout

Ordering Part Numbers

  • STP/SRH/SRG Series: 600-00073
  • SC2 Series: 600-00269

Picture Message Push

Enables rapid, simultaneous distribution of images and associated text to whole groups of users rapidly and efficiently, key examples include enabling quick apprehension of wanted persons or swift identification of missing children.

Distribution of the same picture using Packet Data would have required dedicated network resource for each recipient.

Messages can also be sent securely using E2EE.

Key Features

  • 'Slices' the images and sends via SDS
  • Images sent simultaneously to hundreds of users
  • Does not require Packet data session
  • Messages can be sent securely using E2EE

Ordering Part Numbers

  • STP, SRG and SRH Series: 600-00102
  • SC2 Series: 600-00271

Profile by Talkgroup

Radios are normally configured to route messages and voice to pre-configured destinations. With this feature, radios can be further configured to route status messages, position reports and emergency voice to a destination other than the pre-configured defaults. The alternative destinations are determined at run time based upon the Selected talkgroup. Change of Selected talkgroup automatically changes the destination address for the following functions;

  • Quick Status Destinations triggered via softkeys
  • Default Status Destination triggered via menu and/or the Mode Key
  • Primary Position Destination
  • Secondary Position Destination
  • Emergency Status Destination
  • Emergency Voice Destination

Ordering Part Number

  • SC2, STP and SRG Series: 600-00347

Network Selection by Talkgroup

In trunk mode, talkgroups are identified by their MNI and GSSI. On selection of a talkgroup, this feature enables the radio to automatically select the TETRA network based on the talkgroup’s MNI. Press of a single key changes the network and selects the talkgroup.

Ordering Part Number

  • SC2, STP and SRG Series: 600-00348

DMO/TMO Selection by Talkgroup

A radio User can navigate through the configured list of TMO and DMO to select the required talkgroup. This feature additionally triggers an automatic selection of the operating mode; Trunk or Direct, depending upon the selected talkgroup.

Ordering Part Number

  • SC2, STP and SRG Series: 600-00349

Reset to Default Status

Radios support a number of features that can be configured to suit a user’s operational requirement. Some radio settings e.g. backlight resolution, alert level, active speaker etc. can be further adjusted during run time. This feature resets the radio back to the default configuration eliminating personal preferences.

An option to preserve Phonebook, talkgroup and message boxes is available. If enabled, the reset option retains these data.

Reset option can be activated from from the menu syetem, softkey, over the air and when integrated into an SDA.

Ordering Part Number

  • SC2, STP and SRG Series: 600-00350

Extended Preferred & Fixed LA list

Radios can be configured with a list of up to 150 Location Areas (LA). The radio prefers these LAs when acquiring a cell at switch on or during re-selection. However, if the coverage gets weaker or non-existent the radio will register on an LA outside this list. Registering a similar group of users on the same LA ensures efficient use of TETRA resource.

Additionally, the radio can be forced to only use cells from the the configured LA list. Even if the coverage on these LAs drops, the radio will not acquire an LA outside of the LA list.

Ordering Part Number

  • SC2, STP and SRG Series: 600-00351

Dynamic Home Screen

The top level screen of the radio enables a dynamic display.

The display includes:

  • Radio Status Area
  • Information Area consisting of 4 or 6 lines
  • Shortcut and Notification Bar

The radio status area comprises elements of variable radio status icons, permanent status icons, and radio status text, depending on the radio.

The screen can be configured to include an Information Area. Using the Radio Manager, users can add or remove an information line and define how it is displayed. The information line includes display of talkgroup and folder, time, date and PTT mode. These can be formatted with a choice of colour and style for greater visual impact.

The Shortcut Bar provides means to configure and access commonly used radio features (Shortcuts). It also provides visual status of the radio features (Notifications) on the top level screen. Selecting an icon triggers a radio action relevant to the icon e.g. opens an unread message or alerts the user when the radio is placed in Transmit Inhibit state.

Ordering Part Numbers

  • STP and SRG series: 600-00352
  • SC2 series: Included as standard

Set DMO Power from MMI

The transmit power of a radio operating in DMO, DMO-Repeater & DMO-Gateway mode can be set from the MMI. Users are offered an onscreen choice, dependent on the radio's hardware capability, allowing it to be set to the user's choice.

On selection, an icon indicates whether the chosen power is higher or lower than the default setting. The radios revert to default power setting on a restart. The display text can be configured from the Radio Manager to user’s choice e.g. High Power and Low Power.

Ordering Part Number

  • SC2, STP, SRG Series: 600-00353

Air Interface Migration

AIM is the TETRA air interface mechanism by which a radio obtains service on a network (visited) other than its own Home Network, i.e. a network with a Mobile Network Identity (MNI) different from that of its Home Network. The use case is the TETRA radio users who may roam into another network, normally another country, for operational use e.g. a fire crew attending an emergency on the other side of the border due to its quicker accessibility.

Ordering Part Number

  • SC2, STP and SRG Series: 600-00354

End-to-End Encryption

E2EE offers an additional and independent level of security to AIE. Encrypted data can only be decrypted by the correct combination of the algorithm and traffic key used by the transmitting party to encrypt the data. This avoids a man-in-the-middle attack as the crypto material is only available with the transmitting and receiving parties.

The following options for E2EE are available

  • Embedded E2EE (without tamper protection)
  • ESM Protected E2EE (with tamper protection)
    • In-Country (Private, Local) E2EE algorithm
    • Multiple E2EE algorithms
  • Smart Card E2EE

Please contact your account manager to discuss your requirements.

Audio Profile for Accessories

Audio accessories differ in their mechanical and acoustic design. The radio’s audio parameters need to be accordingly fine-tuned for the best user experience. Audio Profile for Accessories introduces detection and automatic application of the audio parameters for the connected accessory.

Ordering Part Number

  • SC2 and STP Series: 600-00876

Position Report Buffer

Out of Coverage Position Report Buffer

Sepura radios equipped with GNSS receivers determine the user’s position and then automatically inform the command centre of the radio’s position. Knowing the user’s position ensures whereabouts are known at all times and officer’s safety is ensured. Position reports also monitor a user’s movements ensuring time and resource is efficiently managed.

The out of coverage reports can be used to analyse network black spots and piece together the user’s activity.

Fake Switch Off

The feature allows discreet tracking of switched off radios. With the feature enabled, the radio does not power off completely when the switch off button is pressed. The radio enters a fake switch off state where TETRA services are denied to the user and all display and alerts are disabled. To the user the radio appears to be switched off. However, the radio continues to send position reports allowing the radio to be tracked by authorised personnel.

Ordering Part Number

  • SC2, STP and SRG Series: 600-00373