This versatile unit provides multiple battery charging as well as bulk programming capabilities for Sepura hand-portables.
Note: Charger only for STP series radios, Charger/Programmer for SC2 series radios.
The front-facing pocket is designed to accept the hand-portable with either high capacity or standard capacity battery types fitted. This pocket will charge a battery attached to a transceiver. The rear pocket accepts a battery only.
The transceiver LED indicates the battery status. The rear pocket will charge a battery on its own. The left hand tri-colour LED on the front of the charger unit indicates the battery status:
- Green: Battery is ready for use
- Orange: Battery is charging and is not ready for use
- Red & Red flashing: Fault
Product data - charger
|Battery chemistry||Lithium Polymer|
|Operating temperature (charger)||0 °C - +50 °C (see note 1 below)|
|Storage temp||-20 °C - +80 °C|
|Input voltage||24V DC from a separate AC-DC power supply (supplied)|
|Input current||6.2A MAX|
|Power rating||160W MAX|
|Charging method (Rear pocket)||Constant current followed by constant voltage (CCCV)|
|Charging method (Front pocket)||Transceiver controlled, 1000mA|
|Dimensions (L x W x H) approx||430mm x 200mm x 65mm|
|Approvals||CE & FCC|
Note: Although the battery charger will operate over the range 0 °C - +50 °C, the battery will not initiate (or continue), charging if the ambient temperature of the battery is greater than +40 °C.
Product data - power supply
|Mains supply||90-265V AC, 50/60Hz, 0.55A|
|Output||24V DC +/-0.5V, 6A|
|6+6 Desktop Charger/Programmer||300-00846|
|SC21 Charger insert||300-01910|
|USB programming cable||300-01772|
|IEC-C13 (N. America)||300-00989|