SRG3500 Mobile Gateway
When it comes to advanced mobile radio communications, the SRG3500 is hard to beat. This top-of the line radio comes with built-in gateway and repeater functionality. In gateway mode it forms a bridge between the trunked TETRA network and a number of individual hand-helds, giving improved access to the network in areas of poor reception. In repeater mode it acts as a powerful mobile base station for a number of hand-helds in the field, which are operating separately from the TETRA network.
A range of accessories enables the SRG3500 to be mounted in a car or emergency vehicle, on a motorcycle, in a covert vehicle or marine vehicle.
The SRG3500 can be fitted with a GPS module to enable advanced location-based functionality.
Highlights
- Operates as a fully featured mobile radio when not in gateway or repeater mode
- 10 watts maximum power (subject to network regulations) for maximum range. The SRG3500 is the only true 10W gateway available
- Large black and white display that’s simple and easy to read
- Extends trunked TETRA network coverage even in areas with limited reception
- Gives the largest possible range for direct mode operations
- Common interface with all Sepura hand-helds for user familiarity and consistent operation
- Operates with dual, single or no consoles and offers dual data ports and 8 I/O lines for maximum flexibility
Easy to use
- Console is equipped with the same familiar interface as Sepura handhelds, including large text mode and multi-language support
- Clear 6-line greyscale display with white backlight makes information easy to read; clear visual indications of call status is delivered through tri-colour LED
- Navi knob for quick menu navigation; rapid access to features through a full keypad with 14 programmable soft keys
Powerful
- Offers gateway and repeater functionality in addition to full mobile radio capabilities
- 10W gateway functionality for maximum range
- Extends TETRA coverage in gateway mode, linking direct mode and trunked mode coverage for voice, data, location and emergency communications
- Increases the useful range of direct-mode talk groups in repeater mode
Flexible
- Match operational requirements with the widest choice of simultaneous connections
- Dual console
- Dual data ports
- 8 I/O lines
- Open standard PEI ports
- Can be mounted in vehicles, covert vehicles, motorcycles, marine vehicles and on desks
Secure
Equipped with voice and data security to increase personal safety, including:
- Dedicated emergency button to summon help, which works with GPS (when fitted) to transmit location information
- End-to-end encryption of voice and data traffic to reduce the risk of interception, protected by tamper-proof processors
- Optional integral SIM connector for Smart Card solution
DMO Repeater
Achieve greater range with the Sepura DMO Repeater functionality. This feature enables a Sepura terminal to ‘repeat’ received voice and data calls giving greater effective range to the participating terminals. Uniquely available on handheld, covert and gateway radios this licensed feature can be enabled whenever necessary using Radio Manager.
Security
- TMO and DMO Air Interface Encryption support - TEA1, TEA2, TEA3 and TEA4*
- Trunked Mode Security Class 1, 2 and 3
- Direct Mode DM-2C support
- Fully Integrated E2E hardware with tamper protection
- Public & Private Algorithm E2E support enabled via software upgrade*
- Integral SIM connector for Smart Card based E2EE options
* Further infromation available on request
Gateway Services
- (option enabled by a feature license code)
- Group voice call between DMO and TMO
- Individual voice calls between DMO and TMO
- Emergency group call from DMO to TMO
- Emergency group call from TMO to DMO
- Pre-emption (in either direction) of existing call
- SDS messaging in either direction1
- Configurable routing of SDS messages to Console or PEI
- Intelligent handling of point to point calls and SDS messages whilst operating as a Gateway
TETRA Specifications
- EN 300 392 V+D Air Interface
- EN 300 394 V+D Conformance testing
Size and Weight
- Transceiver 980g - 180mm W x 54mm H x 110mm D
- Console 200g - 187mm W x 64mm H x 30mm D
Frequency Bands
- 350 - 372MHz
- 380 - 430MHz
- 440 - 473MHz*
- 806/825 paired with 851/870MHz
* Further information available on request
The Transceiver supports the full bandwidth and allows Trunked (TMO) and Direct (DMO) mode frequency pairs to be allocated anywhere in the frequency band.
Power
- 10W RF Power output (Class 2).
- RF power adjustable in steps of 5dB, independently adjustable for TMO and DMO operations.
- Adaptive Power Control supported.
Audio
- Rated Audio Output - 8 W @ 1kHz into 4 Ohms
- Fixed Level Line-out audio option enabling Broadcast and Recording support*
- Line-in Audio for 3rd party console interface support*
- Independent Volume Control of Loudspeaker and Audio Accessory*
* Further Infromation available on request
GPS Receiver - Optional
- 12 channel GPS receiver
- -163 dBW acquisition sensitivity
- ETSI Location Infromation Protocol
- Position Assist
- Over the Air GPS Management
- Location reporting to two TETRA identities
- Position and Direction display
Environmental
- Dust and water protection to IEC529 IP54
- ETS 300 019 -2-5 drop, vibration and humidity
- Storage Temp -40°C to +85°C
- Operating Temp -30°C to +70°C
Power Supply
- 10.8 to 15.6V DC, typical 13.8V DC
Console Display
- 128 x 64 pixels LCD display with coloured backlights
- Up to 6 lines of 24 characters displayed
Repeater Services
- (option enabled by a feature license code)
- Repeats DMO voice and tone signalling on selected talk group
- Repeats SDS and Status messaging on selected talk group
- ETSI Type 1A DMO Repeater for channel efficient operation
- Priority Call
- Emergency Call (Pre-emptive Priority Call)
- Supports E2E Encrypted DMO traffic
- Call participation whilst in Repeater mode
Voice Services
- Full Duplex Calls (to MS and PABX/PSTN)
- Half Duplex Calls (Individual and Group)
- Late Entry
- Priority Call
- Emergency Call (Pre-emptive Priority Call)
- Emergency Call preference
- Talking Party Identity
- Calling Line Identity Presentation
- DTMF Dialling
- Ambience Listening
Data Services
- Status Messaging
- Short Data Service Messaging
- SDS via DMO Gateway
- Circuit Switched Data Calls
- Multi Slot Packet Data
- Text Message Data Store
- Short Data Applications (SDA)
- Wireless Application Protocol (WAP)
- SDS Store & Forward
Other Functions and Features
- Support for up to 3000 pre-programmed Talkgroups and in any combination of TMO or DMO talk groups
- Up to 50 Dynamic Group Number Assignment (DGNA) and supporting Lifetime Timers
- Efficient management of talk-groups using, up to 255 Folders with up to 75 talk-groups per Folder
- Talk-group Folder Management via PEI and SDS
- Fixed and User Defined Talk-group Scan Lists
- Priority Group Scanning with support for Background groups
- Fast Talk-group Access supports up to 5 TMO and 5 DMO groups
- Query selected Talk-group
- Telephone and Radio user Address Book (2000 entries) across 64 Folders
- Call History with Missed Call alerts
- Transmit Inhibit (TXI) with On/Off Status messaging
- DMO Group and Emergency Calls
- DMO Gateway Interoperability supported
- ETSI compliant PEI port. AT-command interface for external applications
- User Profiles including Pager capability
- Remote control via Status triggered functions
- Status triggered functions (up to 64 configurable actions driven by remote user)
- Macro keys – operation of a single key will perform a sequence of complex functions
- Network Performance Monitoring